Hubbell’s Polycast 400 Series is a polymer concrete trench drain system designed for light traffic applications such as sidewalks, patios and tennis courts. The 400 Series’ non-sloped channels are fitted with galvanized steel slotted grates that can withstand the weight of light vehicles such as lawnmowers and golf carts. The slotted steel grates are bicycle-safe making them pedestrian friendly.
Installing the Polycast 400 Series is made easier with installation chairs, which screw snugly into dimples located at the ends of each channel. Staked to the ground with rebar, Polycast installation chairs allow contractors and homeowners to secure and adjust channels on site for an easier installation.
- Shopping Malls
- Grocery Stores
- Tennis Courts
- Swimming Pools
|Polycast 400 Series Cheat Sheet|
|Channel Length||4 feet (48"), 2 feet (24")|
|Channel Width (OD)||5"|
|Channel Width (ID)||4.25"|
|Outlet Sizes||3" end, 4" bottom|
Pipe Adapter End Caps
Polymer concrete end caps are used to enclose or provide piping transitions as channel outlets. End caps output to a 3" pipe. Material is polyester polymer concrete.
Installation chairs are the most efficient and economical means of setting a precast trench system. The installation chair supports the ends of the channel, aligns and locks the joints rigidly together, and prevents the channels from floating. Adjusting channel elevation is easy. One chair is required for every joint. The chair is made from 1018 hot rolled steel and has a zinc plated finish.